Wall Formwork Stripper - The Efficient & Safe Solution for Wall Formwork Removal

The stripping efficiency is increased by 50%, and the formwork damage rate is reduced to less than 0.5%, making it an essential professional tool for wall construction such as high-rise residential buildings, subway tunnels, and bridge shafts.

1.1 Multi-Scenario Adaptation: No Dead Ends in Narrow Space Operations

Innovative "three-stage detachable structure" with a basic height of 1.2m, which can be extended to 3.3m through modular combination (supporting multiple specifications such as 1.2/2.7/3.3m and combined heights of 3.9/4.5m) to adapt to wall construction with 2.8-6m floor heights . Equipped with "right-angle claw + pointed claw" dual accessories: the right-angle claw is suitable for flat wall stripping, while the pointed claw can reach narrow gaps (minimum gap ≥2mm) such as elevator shafts and stairwells, solving the pain point of "space limitation and difficult corner stripping" of traditional tools.

1.2 Labor-Saving Structural Design: Reducing 70% of Work Intensity

Adopting a "two-stage lever transmission system" that converts manual force into efficient mechanical force, requiring only 12kg of thrust for one person to strip tightly attached formwork (traditional pry bars require more than 45kg). The handle adopts an adjustable telescopic design (length 60-100cm), combined with a non-slip rubber grip and ergonomic curvature, allowing 6 hours of continuous work without wrist soreness, completely solving the industry problem of "bending to exert force and arm strain" .

1.3 High-Strength Material: 6 Times Longer Durability

The main body is integrally forged from Q235 galvanized steel, with a 10μm thick electro-galvanized surface treatment, achieving over 3,000 hours of salt spray resistance and no rust in humid construction environments. The claw head is treated with high-frequency quenching (hardness HRC58-62), which can withstand 2000N impact without deformation or cracking. Compared with ordinary carbon steel tools, its service life is increased by 6 times, and the annual cost per tool is reduced by 65% .

1.4 Dual Protection Design: Reducing Construction Loss

The claw head adopts an arc fillet structure, expanding the contact area with the formwork to 6cm², avoiding formwork edge depression caused by local stress concentration. The built-in manganese steel buffer spring can absorb 35% of the impact force at the moment of stripping, effectively protecting aluminum formwork, steel formwork and concrete wall surfaces from quality defects such as chipping and edge damage. The number of formwork reuses is increased from 20 times (traditional process) to more than 35 times .

3.1 Three-Stage Modular Main Body (Core of Adaptability)

Composed of a top claw, middle connecting rod and bottom handle, it realizes quick assembly through quick-release bolts. The length can be flexibly adjusted according to wall height, eliminating the need to carry multiple tools to meet different floor height construction needs. The connecting rod adopts a hollow design to reduce weight while ensuring strength, which can be easily carried and assembled by one person.

3.2 Dual-Function Replaceable Claw (Key to Scenario Adaptation)

The right-angle claw has a contact area of 6cm², fitting the edge of flat wall formwork to avoid formwork deformation caused by excessive local force. The pointed claw is only 1.5cm thick, which can be inserted into narrow gaps, suitable for traditional tools that are difficult to reach such as stairwells and beam-column joints. The claw surface is polished without sharp edges to prevent scratching the concrete wall .

3.3 Two-Stage Lever Transmission System (Core of Labor Saving)

Amplifying the force through the two-stage lever of "claw-connecting rod" and "connecting rod-handle" with a transmission efficiency of 95%, it can convert 12kg of hand thrust into 180kg of stripping force, easily separating tightly bonded formwork. The handle is made of TPR non-slip rubber with honeycomb patterns on the surface, ensuring a firm grip in wet conditions and reducing operational safety risks.

4.1 Standard Operation Steps (One-Person Operation)

 Confirm that the concrete strength meets the requirements (wall strength ≥75% of design strength), and clean the residual debris between the formwork and the wall;

 Assemble the stripper according to the wall height and type, and select the corresponding claw (right-angle claw for flat walls, pointed claw for narrow spaces);

 Insert the claw into the gap between the formwork and the wall, align with the formwork support point, and push the handle lightly to strip the formwork with lever force;

 After stripping, disassemble the modular components, clean the residual concrete on the claw, and prepare for the next operation.

4.2 Maintenance Tips

 Wipe the surface with a dry cloth after daily work, and apply anti-rust oil at the bolt connection to avoid rust in humid environments;

 Replace the claw in time when it becomes blunt or cracked (the manufacturer provides free parts replacement service for 1 year);

 Disassemble into modular state when storing, with a stacking height not exceeding 1.2m to avoid extrusion deformation;

 Conduct comprehensive derusting treatment before long-term storage, apply anti-rust grease and seal for preservation.

Choosing Shaanxi Flourish Wall Formwork Stripper is a triple guarantee for construction efficiency, work safety and cost control. From narrow space operations to high wall stripping, from aluminum formwork to steel formwork adaptation, we empower every wall construction scenario with professional design!