Shaanxi Flourish Industrial Co., Ltd. – Attached Lifting Scaffold System
With over 25 years of engineering practice in high-rise construction, Shaanxi Flourish Industrial Co., Ltd. presents its Attached Lifting Scaffold System-a full-steel, intelligent climbing solution purpose-built for projects ranging from 10 to 40 stories. Engineered to outperform conventional tube-and-coupler scaffolding and lightweight integrated platforms, this system delivers higher load capacity, faster lifting cycles, and multi-layered safety assurance.
Products Description
1.Product Overview
The Attached Lifting Scaffold System integrates mechanical lifting, structural support, and real-time monitoring into a unified platform. Its modular design supports rapid assembly, repeated reuse, and stable operation under heavy-load conditions, making it a practical choice for high-rise facade work, concrete pouring, and material handling.
2.Core Advantages (High-Rise Specialized Design)
2.1 Intelligent Synchronous Lifting
- Equipped with dual-drive electric hoists (rated 7.5t) and gear-rack transmission, achieving a steady lifting speed of 0.5 m/min-substantially faster than conventional climbing frames.
- Built-in synchronous control monitors load differentials and horizontal deviation: alerts trigger at ±15% load variation, with automatic shutdown at ±30%; height discrepancy beyond 30mm halts operation, in line with GB 50838-2015 requirements.
- No repeated disassembly during floor transitions; each lift covers 4–5 storeys, reducing manual labor by up to 80% compared to traditional pipe scaffolding.
- Verified on-site: a 30-storey residential project completed external works in 68 days, versus 112 days using conventional systems.
2.2 9-Tier Safety Protection
- Dual-lock anti-fall catch engages within 0.1 seconds in case of hoist failure, supported by 4m-high HDPE anti-fall nets with impact resistance rated at 100kg.
- Anti-tipping ensured by three wall-attached supports per lifting point, secured with M30 anchor bolts (concrete grade ≥C20), limiting horizontal displacement to ≤20mm.
- Real-time load display across 12 lifting points; power cuts off automatically when load exceeds 30kN/m².
- Wind resistance up to 12 m/s (Beaufort Force 6); hot-dip galvanized coating at 80μm withstands 1,800 hours of salt-spray testing per ASTM B117.
2.3 Heavy-Duty Full-Steel Structure
- Main frame fabricated from Q355B high-tensile steel (yield strength 355MPa), with 3mm-thick anti-slip walkway plates-supports up to two workers plus 500kg of materials per square metre.
- Removable diagonal braces (45°) and 1.2m-high edge guardrails enable adaptation to curved facades and corner configurations.
- Reinforced welded joints (6mm fillet) provide over 200 reuse cycles-significantly longer than semi-steel alternatives.
- Five-year cost per m²: $22, compared to $30 for rental lightweight systems and $35 for traditional climbing frames-representing a 42% cost saving over the period.
2.4 Optimized Logistics and Site Efficiency
- Dismantled modules measure 1.2m (width) × 2.0m (height), allowing up to 80 units to fit in a standard 10m container-40% more than conventional frames.
- Pre-assembled components cut on-site setup time by 60%; a two-person crew can install 50m² within an 8-hour shift.
- Shipping weight: 1 ton covers approximately 65m², with transport cost at $0.8/m² versus $1.5/m² for comparable systems.
Products Specifications
| Parameter | Attached Lifting Scaffold System | Lightweight Integrated Platform | Traditional Climbing Frame |
|---|---|---|---|
| Applicable Height | 10–40 storeys (max 120m) | 5–20 storeys (max 60m) | 8–35 storeys (max 105m) |
| Lifting Speed | 0.5 m/min (synchronous) | 0.2 m/min (synchronous) | 0.17 m/min (stepwise) |
| Load Capacity | 30 kN/m² | ≤0.5 kN/m² | 20 kN/m² |
| Safety Devices | 9-fold (fall, tipping, overload) | 3-fold (basic guardrails) | 5-fold (fall, tipping) |
| Material | Q355B full steel | Aluminium alloy + steel | Semi-steel |
| Corrosion Resistance | 1,800h salt-spray | 1,200h salt-spray | 1,500h salt-spray |
| Reuse Cycles | 200+ | 100+ | 120+ |
| 5-Year Cost per m² | $22 | $30 | $35 |
Core Components
1. Full-Steel Main Frame
- Dimensions: 1.2m × 2.0m; tube OD 48.3mm, wall thickness 3.0mm.
- Material: Q355B steel (elongation ≥20%, impact toughness ≥34J at -20°C).
- Finish: Hot-dip galvanized; integrated guide rails for lifting alignment.
- Unit weight: 28kg-40% heavier than semi-steel frames, with twice the structural strength.
2. Intelligent Lifting Unit
- Electric hoist: rated 7.5t, 380V/50Hz.
- Gear-rack transmission with PLC controller; synchronous error ≤5mm.
- Equipped with emergency stop, overload and underload sensors.
- Wireless remote control with effective range of 50m.
3. Wall-Attached Support Syste
- Three supports per lifting point; M30 anchor bolts, 200mm length.
- High-strength carbon steel, tensile grade 8.8.
- Adjustable angle 0–15° to accommodate irregular building surfaces.
- Compliant with concrete strength ≥C20 as per GB 50838-2015.
4. Safety Accessorie
- Anti-fall nets: HDPE, 50mm×50mm mesh, breaking strength 15kN.
- Walkway plates: 3mm anti-slip steel, rated 2kN/m².
- Guardrails: 1.2m height with mid-rails, conforming to OSHA 1926.451.
FAQ (High-Rise Contractor Focus)
1. How does this system differ from lightweight integrated platforms?
Lightweight platforms (≤0.5kN/m²) are limited to tool and personnel access and are unsuitable for heavy-load operations such as concrete placement. Our system supports 30kN/m², handles materials and equipment simultaneously, and lifts at 2.5 times the speed-making it the preferred choice for high-rise heavy construction.
2. Does the system meet international safety standards?
Yes. It holds certifications under EN 12811-1 (EU), OSHA 1926.451 (USA), and GB 50838-2015 (China). The 9-tier protection system, including dual anti-fall locks and continuous load monitoring, has consistently passed all third-party inspections.
3. What is the minimum building height for application?
The system is optimized for buildings of 10 storeys or more (≥30m). For projects between 5 and 9 storeys, we offer alternative modular scaffolding solutions to ensure cost-effectiveness across different scales.
4. What are the MOQ and lead time?
Minimum order quantity is 20 units (covering approximately 50m²). Standard orders are dispatched within 5–7 days; custom configurations (e.g., curved frames) require 10–14 days. Complimentary on-site training and a 1-year warranty are included.
Shaanxi Flourish Industrial Co., Ltd. delivers an attached lifting scaffold system that combines intelligence, structural integrity, and field-proven performance-engineered to keep high-rise projects on schedule and within budget.
