Products Description
The Q700 High-Strength Alloy Steel Tie-Rod Formwork Panel is the vertical wall panel of the Q700 system: a 1.5 mm Zn-Al-Mg coated face on 2.0 mm edge frames, with Phi 16 and 18 mm tie-rod holes pre-punched at fixed centers. Four fixed modules - 300 and 500 mm widths in 1200 and 2400 mm lengths - assemble into commercial building walls and basement retaining walls, clamped through standard formwork tie rods with wall-through bolts, tie plates, and plastic cone nuts from one supplier.
Within the same Q700 family, our high-strength alloy steel flat panels are pin-jointed deck and floor panels without tie-rod holes, and the concrete wall formwork system page covers the assembled wall system as a whole; this page covers the tie-rod panel module itself. The tie-rod direction is deliberate: against pull-tab wall systems, tie-rod clamping is the route our system documentation favors for wall pours - more stable under full head, resistant to burst pressure, and universal with standard accessories.
01
Four modules, no custom panels
300/500 mm widths in 1200/2400 mm lengths cover wall grids; holes are punched at fixed centers so panels align without measuring.
02
Stable under full head
tie rods clamp both wall faces through above-700 MPa frames; the documented tie-rod route resists burst pressure and stays universal with standard rods and nuts.
03
Fair-faced in damp basements
laser-welded seams strip to a finish that needs no secondary plastering, and the ZAM coating self-heals punched hole edges for 1500+ salt-spray hours.
04
One tie system, one factory
rods, wall-through bolts, tie plates, and cone nuts ship with the panels, joined by shared pins and wedges for corner and stop-end work.
Core Specifications
| Parameter | Specification |
|
Material |
Q700 high-strength alloy steel, Zn-Al-Mg (ZAM) coated |
|
Yield Strength |
Above 700 MPa |
|
Face Plate |
≥1.5 mm |
|
Edge Frame |
≥2.0 mm |
|
Widths |
300 and 500 mm |
|
Lengths |
1200 and 2400 mm |
|
Tie-Rod Holes |
Phi 16 and 18 mm, pre-punched |
|
Connection |
Tie-rod clamping with wall-through bolts |
|
Applications |
Commercial building walls, basement retaining walls |
|
Coating |
Zn-Al-Mg, 1500+ h salt spray, cut-edge self-healing |
|
Color Consistency |
Delta E 1.5 or below |
|
Casting Quality |
Fair-faced finish, verticality within 4 mm, flatness within 3 mm (system grid) |
|
Panel Weight |
Approx. 25 kg/m² |
|
Reuse Cycles |
300+ |
|
Recyclability |
100% steel |
Applications
Commercial building walls - the four fixed modules (300/500 mm widths, 1200/2400 mm lengths) tile standard wall grids without custom panels, and punched holes at fixed centers let crews align panels without measuring.
Basement retaining walls - in damp below-grade work the ZAM coating self-heals the punched hole edges for 1500+ salt-spray hours, and laser-welded seams strip to a fair-faced finish with no secondary plastering.
High head, full-depth pours - tie rods clamp both wall faces through above-700 MPa frames; the tie-rod route stays stable under full head and resists burst pressure where pull-tab systems reach their limit.
Full wall packages from one factory - panels ship with matching tie rods and cone nuts, and join the assembled concrete wall formwork system for complete wall pours.
One-stop Q700 Formwork Factory in China
Flourish Industrial supplies the complete Q700 high-strength alloy steel formwork system - tie-rod wall panels, deck panels, columns, beams, corners, and the full tie-rod accessory line from one factory. CONTACT US for project pricing.
