Shaanxi Flourish's 's Reusable Aluminium Formwork stands as a game-changer for cost-conscious and eco-friendly construction, engineered to solve the "high replacement frequency" and "high waste" pain points of disposable formworks. Crafted with industrial-grade 6061-T6 aluminum and anti-fatigue structural design, it achieves 300+ reuses (10-year service life) while fitting walls, columns, floors, and stairs-your reliable partner for large-scale projects (residential complexes, commercial buildings) pursuing long-term value and green compliance.
Core Advantages (Reusability & Cost-Efficiency)
1. Anti-Fatigue Reusable Structure：Unique "honeycomb core + reinforced edge" design (patented) enhances structural fatigue resistance-after 300 reuses, deformation rate ≤0.3% (industry average is 1.2%). The 12μm double-layer anti-corrosion coating (epoxy primer + polyester topcoat) achieves salt-spray resistance ≥1500h, adapting to coastal, high-humidity construction environments without rust.
2. Full-Scenario Modular Adaptation：Standardized modular components (panel, frame, fastener) can be freely combined into wall (100-300mm thickness), column (200-800mm diameter), floor (span ≤4m), and stair (30°-45° angle) formworks. No need to purchase dedicated formworks for different structures-reducing inventory by 65% vs. single-structure reusable formworks.
3. Low Total Cost of Ownership (TCO)：1 set replaces 5+ disposable wooden formworks, cutting annual procurement cost by 70%. Maintenance only requires water cleaning + annual coating touch-up (cost ≤0.5/sqm/year), while steel reusable formworks need rust removal + painting (cost ≥3/sqm/year). Over 10 years, TCO is 1/3 of steel formworks.
4. Eco-Friendly & Compliance：100% recyclable aluminum (recycled rate 95%+), meeting LEED, BREEAM green building standards. Reduces construction waste by 80% vs. wooden formworks-helping projects obtain green building certification bonus points.
5. Efficient Assembly & Demolding：Lightweight (22kg/m²) enables 2 workers to assemble 50㎡ formwork daily (30% faster than steel formworks). The panel's PTFE anti-stick coating ensures demolding in 5 minutes per 10㎡ (no concrete adhesion), reducing demolding labor by 50%.
Products Description
1. Material & Performance：
Aluminum Alloy: 6061-T6 (density 2.7g/cm³, yield strength 205MPa, tensile strength 310MPa)
Coating: Double-layer anti-corrosion (12μm, epoxy + polyester), salt-spray resistance ≥1500h
Reusability: ≥300 times, service life ≥10 years, deformation rate ≤0.3% after 300 reuses
2. Modular Components：
Panel: 4mm thick aluminum, honeycomb core, PTFE anti-stick coating, size 1200×2400mm/900×2400mm
Frame: 8mm thick aluminum profile, reinforced edge, compatible with all panels
Fastener: Stainless steel snap-lock, service life ≥500 uses, locking torque 25N·m
3. Adaptation Parameters：
Wall Formwork: Thickness 100-300mm, height 2.4-4.8m
Column Formwork: Diameter 200-800mm, height 2.4-6m
Floor Formwork: Span ≤4m, load-bearing 50kN/m²
Stair Formwork: Step depth 250-320mm, riser height 150-180mm
FAQ
1. How to verify the number of reuses?
：Each formwork has a built-in "reuse counter" (mechanical type, no battery) that records assembly-disassembly cycles. We also provide annual inspection service to test structural performance.
2. Can it be used for high-strength concrete (C60-C80)?
：Yes-we offer "high-pressure reinforcement kits" (adds 2mm thick frame and high-strength fasteners) to enhance load-bearing to 65kN/m², suitable for C60-C80 concrete pouring.
3. What if components are lost/damaged?
：We maintain a global spare parts warehouse (delivery within 3-5 days) and offer "component replacement guarantee"-no need to replace the entire set, reducing maintenance cost by 80%.
Choose Shaanxi Flourish's Reusable Aluminium Formwork-where 300+ reuses meet low TCO and green compliance. Build efficiently, economically, and sustainably!
